How to produce badminton rackets?
Cut a large piece of carbon fiber cloth into small pieces. Roll the carbon fiber cloth into a circular tube. Reel lever part
Roll the frame part. Take the rolled round tube to preform. Clean the mold, send it to the hot pressing table to heat for 10 minutes, take it out and open and wipe it. After the hot mold is cooled to 50 degrees after 10 minutes, it is ready to be put into the mold.
The mold is opened and placed on both sides, and the side plates are opened to take out the correct pre-shaped racket. After entering the mold, close the mold. After covering the mold, it should be sent into the hot pressing table as soon as possible for heating and forming. This process takes half an hour before the epoxy resin becomes solid. After heating for half an hour, take out the finished embryo. Take the overflowing epoxy underneath and grind it away. For rough grinding of feather bat hair embryo, use a file to grind the resin crumbs on the frame.
The next step is to drill the threading hole. After drilling the empty space, it is necessary to assemble the wooden handle and pour the mixed glue into the wooden handle. After applying the glue, put them together. Group wooden handles need to adjust the levelness of each plane. After assembling the wooden handles, you can get a rough picture. Leave it to stand for 8 hours, and they will become a solid one. The next step is the fine mold. The fine mold is to prepare for soil filling. Finally, the net is pulled, and a racket is complete.
